Serie de perfil bajo

Conectores rectangulares de perfil bajo, con versiones micro, estándar y de alimentación/Ethernet. Cada grupo dispone de sus propios planos y datos eléctricos y de cable.

Especificaciones de perfil bajo

Ciclos de conexión bajo el agua: >500
Temperatura (agua): −4°C to +60°C
Temperatura (aire): −40°C to +60°C

Materiales y condiciones de funcionamiento

Material del cuerpo: Chloroprene rubber

Contactar Catálogo (PDF, inglés)

Productos

Pasamuros · 2 contactos

HembraLPBH2F

Hembra · LPBH2F. Forma pasamuros con 2 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPBH2F
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Female
Number of contacts / pins	2
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	10 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

HembraLPBH2F

Hembra · LPBH2F. Forma pasamuros con 2 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPBH2F-V
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Female
Number of contacts / pins	2
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	10 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

MachoLPBH2M

Macho · LPBH2M. Forma pasamuros con 2 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPBH2M
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Male
Number of contacts / pins	2
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	10 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Protección / tapón ciego · 2 contactos

Forma de conectorLPDC2F

LPDC2F. Forma protección / tapón ciego con 2 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPDC2F
Series	Low Profile (LP) Series
Configuration	Dummy Connector (protective)
Number of contacts / pins	2
Voltage rating	N/A (no live contacts)
Current per contact	N/A
Maximum total current	N/A
Insulation resistance	N/A
Contact resistance	N/A
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	None (dummy)
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Protección / tapón ciego · 2 contactos

Forma de conectorLPDC2F

LPDC2F. Forma protección / tapón ciego con 2 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPDC2F-V
Series	Low Profile (LP) Series
Configuration	Dummy Connector (protective)
Number of contacts / pins	2
Voltage rating	N/A (no live contacts)
Current per contact	N/A
Maximum total current	N/A
Insulation resistance	N/A
Contact resistance	N/A
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	None (dummy)
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 4 contactos

HembraLPIL4F

MachoLPIL4M

Hembra · LPIL4F. Forma en línea con 4 contactos para Serie de perfil bajo.

Macho · LPIL4M. Forma en línea con 4 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPIL4F	Macho LPIL4M
Model number	LPIL4F	LPIL4M
Series	Low Profile (LP) Series
Configuration	In-Line (IL) — Female	In-Line (IL) — Male
Number of contacts / pins	4
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	20 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 4 contactos

HembraLPBH4F

MachoLPBH4M

Hembra · LPBH4F. Forma pasamuros con 4 contactos para Serie de perfil bajo.

Macho · LPBH4M. Forma pasamuros con 4 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPBH4F	Macho LPBH4M
Model number	LPBH4F	LPBH4M
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Female	Bulkhead (BH) — Male
Number of contacts / pins	4
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	20 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Protección / tapón ciego · 4 contactos

HembraLPDC4F

MachoLPDC4M

Hembra · LPDC4F. Forma protección / tapón ciego con 4 contactos para Serie de perfil bajo.

Macho · LPDC4M. Forma protección / tapón ciego con 4 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPDC4F	Macho LPDC4M
Model number	LPDC4F	LPDC4M
Series	Low Profile (LP) Series
Configuration	Dummy Connector (protective)
Number of contacts / pins	4
Voltage rating	N/A (no live contacts)
Current per contact	N/A
Maximum total current	N/A
Insulation resistance	N/A
Contact resistance	N/A
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	None (dummy)
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 5 contactos

HembraLPIL5F

MachoLPIL5M

Hembra · LPIL5F. Forma en línea con 5 contactos para Serie de perfil bajo.

Macho · LPIL5M. Forma en línea con 5 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPIL5F	Macho LPIL5M
Model number	LPIL5F	LPIL5M
Series	Low Profile (LP) Series
Configuration	In-Line (IL) — Female	In-Line (IL) — Male
Number of contacts / pins	5
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	20 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 5 contactos

HembraLPBH5F

MachoLPBH5M

Hembra · LPBH5F. Forma pasamuros con 5 contactos para Serie de perfil bajo.

Macho · LPBH5M. Forma pasamuros con 5 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPBH5F	Macho LPBH5M
Model number	LPBH5F	LPBH5M
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Female	Bulkhead (BH) — Male
Number of contacts / pins	5
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	20 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 7 contactos

HembraLPIL7F

MachoLPIL7M

Hembra · LPIL7F. Forma en línea con 7 contactos para Serie de perfil bajo.

Macho · LPIL7M. Forma en línea con 7 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPIL7F	Macho LPIL7M
Model number	LPIL7F	LPIL7M
Series	Low Profile (LP) Series
Configuration	In-Line (IL) — Female	In-Line (IL) — Male
Number of contacts / pins	7
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	28 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 7 contactos

HembraLPBH7F

MachoLPBH7M

Hembra · LPBH7F. Forma pasamuros con 7 contactos para Serie de perfil bajo.

Macho · LPBH7M. Forma pasamuros con 7 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPBH7F	Macho LPBH7M
Model number	LPBH7F	LPBH7M
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Female	Bulkhead (BH) — Male
Number of contacts / pins	7
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	28 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Protección / tapón ciego · 7 contactos

HembraLPDC7F

MachoLPDC7M

Hembra · LPDC7F. Forma protección / tapón ciego con 7 contactos para Serie de perfil bajo.

Macho · LPDC7M. Forma protección / tapón ciego con 7 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPDC7F	Macho LPDC7M
Model number	LPDC7F	LPDC7M
Series	Low Profile (LP) Series
Configuration	Dummy Connector (protective)
Number of contacts / pins	7
Voltage rating	N/A (no live contacts)
Current per contact	N/A
Maximum total current	N/A
Insulation resistance	N/A
Contact resistance	N/A
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	None (dummy)
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 7 contactos

MachoLPIL9M

Macho · LPIL9M. Forma en línea con 7 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPDC7M
Series	Low Profile (LP) Series
Configuration	Dummy Connector (protective)
Number of contacts / pins	7
Voltage rating	N/A (no live contacts)
Current per contact	N/A
Maximum total current	N/A
Insulation resistance	N/A
Contact resistance	N/A
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	None (dummy)
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 2 contactos

MachoLPIL2M

Macho · LPIL2M. Forma en línea con 2 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPIL2M
Series	Low Profile (LP) Series
Configuration	In-Line (IL) — Male
Number of contacts / pins	2
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	10 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 9 contactos

HembraLPIL9F

Hembra · LPIL9F. Forma en línea con 9 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPIL9F
Series	Low Profile (LP) Series
Configuration	In-Line (IL) — Female
Number of contacts / pins	9
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	36 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 9 contactos

HembraLPBH9F

MachoLPBH9M

Hembra · LPBH9F. Forma pasamuros con 9 contactos para Serie de perfil bajo.

Macho · LPBH9M. Forma pasamuros con 9 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPBH9F	Macho LPBH9M
Model number	LPBH9F	LPBH9M
Series	Low Profile (LP) Series
Configuration	Bulkhead (BH) — Female	Bulkhead (BH) — Male
Number of contacts / pins	9
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact (2–4 pin) / 4 A per contact (5–9 pin)
Maximum total current	36 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Protección / tapón ciego · 9 contactos

HembraLPDC9F

MachoLPDC9M

Hembra · LPDC9F. Forma protección / tapón ciego con 9 contactos para Serie de perfil bajo.

Macho · LPDC9M. Forma protección / tapón ciego con 9 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parámetro	Hembra LPDC9F	Macho LPDC9M
Model number	LPDC9F	LPDC9M
Series	Low Profile (LP) Series
Configuration	Dummy Connector (protective)
Number of contacts / pins	9
Voltage rating	N/A (no live contacts)
Current per contact	N/A
Maximum total current	N/A
Insulation resistance	N/A
Contact resistance	N/A
Mated pressure rating	600 Bar (8,700 psi)
Open-face pressure rating	300 Bar (4,350 psi)
Rated depth (mated)	6,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	None (dummy)
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 3 contactos

MachoLPMBH-3-MP-IM

Macho · LPMBH-3-MP-IM. Forma pasamuros con 3 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPMBH-3-MP-IM
Series	Impulse Low Profile Micro Series
Configuration	Bulkhead (BH) — Male
Number of contacts / pins	3
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact
Maximum total current	15 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	690 Bar (10,000 psi)
Open-face pressure rating	480 Bar (7,000 psi)
Rated depth (mated)	7,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 3 contactos

HembraLPIL-3-FS-IM

Hembra · LPIL-3-FS-IM. Forma en línea con 3 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPIL-3-FS-IM
Series	Impulse Low Profile Micro Series
Configuration	In-Line (IL) — Female
Number of contacts / pins	3
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact
Maximum total current	15 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	690 Bar (10,000 psi)
Open-face pressure rating	480 Bar (7,000 psi)
Rated depth (mated)	7,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 7 contactos

MachoLPIL-7-MP-IM

Macho · LPIL-7-MP-IM. Forma en línea con 7 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPIL-7-MP-IM
Series	Impulse Low Profile Micro Series
Configuration	In-Line (IL) — Male
Number of contacts / pins	7
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact
Maximum total current	35 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	690 Bar (10,000 psi)
Open-face pressure rating	480 Bar (7,000 psi)
Rated depth (mated)	7,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 7 contactos

HembraLPMBH-7-FS-IM

Hembra · LPMBH-7-FS-IM. Forma pasamuros con 7 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPMBH-7-FS-IM
Series	Impulse Low Profile Micro Series
Configuration	Bulkhead (BH) — Female
Number of contacts / pins	7
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact
Maximum total current	35 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	690 Bar (10,000 psi)
Open-face pressure rating	480 Bar (7,000 psi)
Rated depth (mated)	7,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

En línea · 8 contactos

MachoLPIL-8-MP-IM

Macho · LPIL-8-MP-IM. Forma en línea con 8 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPIL-8-MP-IM
Series	Impulse Low Profile Micro Series
Configuration	In-Line (IL) — Male
Number of contacts / pins	8
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact
Maximum total current	40 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	690 Bar (10,000 psi)
Open-face pressure rating	480 Bar (7,000 psi)
Rated depth (mated)	7,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD

Pasamuros · 8 contactos

HembraLPMBH-8-FS-IM

Hembra · LPMBH-8-FS-IM. Forma pasamuros con 8 contactos para Serie de perfil bajo.

Especificaciones técnicas

Parameter	Value
Model number	LPMBH-8-FS-IM
Series	Impulse Low Profile Micro Series
Configuration	Bulkhead (BH) — Female
Number of contacts / pins	8
Voltage rating	250 V DC/AC rms
Current per contact	5 A per contact
Maximum total current	40 A
Insulation resistance	>200 MΩ
Contact resistance	<0.01 Ω
Mated pressure rating	690 Bar (10,000 psi)
Open-face pressure rating	480 Bar (7,000 psi)
Rated depth (mated)	7,000 m (mated)
Wet-mate cycles	>500
Temperature (water)	−4°C to +60°C
Temperature (air)	−40°C to +60°C
Body design	Low-profile flat body — minimum drag
Body material	Chloroprene rubber
Shell material	316 Stainless Steel (Titanium on request)
Contacts	Gold-plated beryllium copper / brass
Locking sleeve	POM or Stainless Steel (mandatory before deployment)
O-ring seals	Nitrile
Cable jacket	Polyurethane (PUR) — customer-specified OD